HPE Nimble Array Setup
Exercise Summary
0 of 1 questions completed
Questions:
- 1
Information
You have already completed the exercise before. Hence you can not start it again.
Exercise is loading…
You must sign in or sign up to start the exercise.
You must first complete the following:
Results
Results
Time has elapsed
Categories
- Not categorized 0%
- 1
- Answered
- Review
-
Question 1 of 1
1. Question
HPE Nimble Array Setup
In this exercise you will use Nimble Setup Manager, followed by the Nimble WebUI to perform initial configuration of a Nimble array.
1. Open Nimble Setup Manager. It should already show an unconfigured Nimble array which is on the same subnet as the Windows server.
2. Start the setup process by clicking next. The information you require to complete the setup is in the table below.
Array Name nimble-02 Group Name Name = NIMGRP2 Membership = not part of a group Management IP address Primary = 192.168.1.28 / 255.255.255.0 Secondary = 192.168.1.29 / 255.255.255.0
Standard MTU (1500)
No resilence
Subnet Traffic Type = mgmt + data
Management Default Gateway 192.168.1.253 Discovery IP address 192.168.1.30 Data IP address 192.168.1.31 / 255.255.255.0 Standard MTU (1500)
No resilience
Diagnostic IP address 192.168.1.32 and 192.168.1.33 DNS Domain: labs.storage Nameserver: 192.168.1.100
Time Configuration Timezone: Europe/Madrid Time server: es.pool.ntp.org
Default admin password Password01! Alerting Enabled HTTP Proxy: none
SMTP Alerts: enabled
SMTP Server: 192.168.1.100
Sending address: This can be anything. It does not need to be a valid email address. However, the domain portion of the email address cannot end with .local
Destination address: This can be any valid email address.